Feeder machine
Discharge machine
Furnace
Connection pipes between rotary dryer and furnace
Roller ring
Big gear
Transmission parts(motor,reducer,small gear)
Carrier roller
Tug based
Cyclone which is collect the dust out from the drying mahine.
Fan which is absorb the heat enter into the rotary drying machine
2. Working principle of rotary drying machine/equipment:
1) The sand from rotary dryer was sent to hopper by belt conveyor or bucket elevator and then by the feeding machine of hopper through charging pipe into the feeding side.
2) The slope of feeding pipeline from rotary dryer should bigger than the materials' natural dip angle, in order to sand smoothly flow into the dryer machine.
3) The drum of rotary dryer is a rotary drum which is slightly obliquely with the horizontal line. Add the materials from the higher side, heating body goes into the lower end, form countercurrent contact with materials, also exists the heat body and materials together concurrent flow into the barrel. Along with the cylinder rotating, the materials move to the lower end by gravity.
4) During the moving process of rotary dryer, wet materials in the cylinder directly or indirectly got heat from the heating body, make wet materials to dry, then in the discharging end the materials were sent out by belt conveyor or screw conveyor.
If you are interested in our rotary drying machine, please answer the questions as down below:
1.What the raw material you want to dry?
2.What the moisture before and after drying?
3.What the capacity per hour? before or after drying capacity?
4.What the fuel you will use for the dryer?
5.What the purpose after drying?
We hope you can give us the answer so that according to your need we will supply you exact machine with best offer as soon as possible. Also we will give you big discount for our dryer machine.
contact:
Whatsapp:008613592505674
Email:sales@hwdcrusher.com
