A Good Choice for Drying System Furnace Heater
1.The composes of stove:
2.The main feature of it:
(2)Before and after the heat exchanger,the combustion furnace disposed intermediate and steering flue,the heat exchanger is not directly heated by the high temperature of the flame,extended service life.
(3)The reasonable design inside the heat exchanger the flue gas flow rate and air flow rate.Flue gas in the cooling process,the large volume change,the flue gas flow rate control in a reasonable range,both higher heat transfer effects cited wind resistance and avoid too large,resulting in a positive pressure combustion and therefore changer the heat transfer surface of the heat pipe root number designed for a different quantity,the flue gas flow rate is always in a reasonable of values.
(4).Heat exchanger design using a small temperature difference,then it can reduce the heat changer inlet flue gas temperature,reduced the temperature difference of the heat exchange of the flue gas with air,it can significantly reduce the wall temperature of the high temperature zone of the heat exchanger,greatly extend the service life of the heat exchanger.
contact:
Whatsapp:008613592505674
Email:sales@hwdcrusher.com
