Economical & Practical Hot Air Dryer Machine
Brief introduction of hot air dryer machine:
The dryer is consisted of hot -wind stove, screw feeder, buffer, blower, the pips and cyclone.
The work process is that the air flow is forned through the negative pressure of blower, the materials enter into the pipe through the screw feeder, so that the hot wind and materials mix together, and the moisture is separated from the matertials when passing the cyclone. At last, the material is dried. It can dry the materials mainly using the hot wind produced by the hot-blast stove, the machine is aplplied to the material in disperased state which contains hgih moisture humidit, such as the sawdsut, grain or straw.
Features of hot air dryer machine:
3· High thermal efficiency air dryer: air drying materials used with the gas and stream operations, from beginning to end material and air temperatures can reach a reasonable state, short drying time, which can use a higher drying temperature.
4· Air dryer for a wide range, high yield, precipitation amplitude; simple structure, station area, low investment and low maintenance cost.
5· Hot air dryer Source: Fuel stove, gas stove, coal stove, steam heat exchanger.
Technical parameters of hot air dryer machine:
|
Model |
GX- I |
GX- II |
GX- III |
GX-IV |
|
Capacity (kg/h) |
300-500 |
600-800 |
1000-1500 |
1500-2000 |
|
Material diameter&length |
< 1mm & < 5mmG |
< 1mm & < 5mm |
< 1mm & < 5mm |
< 1mm & < 5mm |
|
Moisture of raw material |
≤40% |
≤40% |
≤40% |
≤40% |
|
Power (kw) |
4 |
5.5 |
7.5 |
7.5--11 |
|
Weight (kg) |
1200 |
1600 |
2000 |
2600 |
|
Hot temp(°C) |
260--360 |
260--360 |
260--360 |
260--360
|
contact:
Whatsapp:008613592505674
Email:sales@hwdcrusher.com
